How To Remove Asc System Service Required

Mitsubishi Outlander: Active stability control (ASC)

The active stability control (ASC) takes overall control of the anti-lock brake system, traction command role and stability control role to assistance maintain the vehicle's command and traction.

Delight read this section in conjunction with the page on the anti-lock restriction system, traction control role and stability control function.

Anti-lock restriction organisation (ABS) → iv-32.

Traction control function → 4-37.

Stability control function → iv-37.

Caution:

● Exercise not over-rely on the ASC. Even the ASC cannot prevent the nautral laws of physics from acting on the vehicle.

This system, similar any other system, has limits and cannot assist you to maintain traction and command of the vehicle in all circumstances. Reckless driving can lead to accidents. Information technology is the commuter'southward responsibility to drive advisedly. This means into business relationship the traffic, road and ecology weather.

● Be sure to utilize the aforementioned specified type and size of tyre on all 4 wheels. Otherwise, the ASC may not work properly.

● Practice not install commercially bachelor express slip differential (LSD) on your vehicle. The ASC may terminate functioning properly.

NOTE:

● A whining audio may be emitted from the engine compartment in the following situations. The audio is associated with checking the operations of the ASC. It does non point a malfunction.

• When the ignition switch is fix to the "ON" position.

• When the vehicle is driven for a while afterward the engine is turned on.

● When the ASC is activated, you may feel a vibration in the vehicle trunk or hear a whining sound from the engine compartment.

This indicates that the organisation is operating normally. It does not betoken a malfunction.

● When the anti-lock brake organization warning lamp is illuminated, the ASC is not agile.

Traction control function

On slippery surfaces, the traction control function prevents the bulldoze wheels from spinning excessive, thus helping the vehicle to showtime moving from a stopped condition. It as well provides sufficient driving forcefulness and steering performance every bit the vehicle turns while pressing the acceleration pedal.

CAUTION:

● When driving a vehicle on a snowy or icy route, be certain to install snow tyres and drive the vehicle at moderate speeds.

Stability control function

The stability control function is designed to help the driver maintain control of the vehicle on slippery roads or during rapid steering maneuvers. It works by controlling the engine output and the brake on each cycle.

Notation:

● The stability control part operates at speeds of about 15 km/h (ix mph) or college.

"ASC OFF" switch

The ASC is automatically activated when the ignition switch is turned to the

The ASC is automatically activated when the ignition switch is turned to the "ON" position. You can deactivate the system past pressing downward the "ASC OFF" switch for three seconds or longer.

When the ASC is deactivated, thedisplay will be illuminated in the multi-information display. To reactivate the ASC, momentarily printing the "ASC OFF" switch; thedisplay is turned off.

Caution:

● For prophylactic reasons, the "ASC OFF" switch should be operated when your vehicle is stopped.

● Exist sure to keep the ASC on while driving in normal circumstances.

Annotation:

● When moving out of mud, sand or fresh snowfall, pressing the accelerator pedal may not allow the engine speed to increment. In such situations, temporarily turning off the ASC with the "ASC OFF" switch will make information technology easier to move out your vehicle.

● Using the "ASC OFF" switch turns off both the stability command function and the traction control function.

● If you go on to press the "ASC OFF" switch after the ASC is turned off, the "mistaken operation protection office" will activate and the ASC will plough back on.

After the "mistaken operation protection role" is activated, it volition not be possible to plow the ASC off.

To plough the organization off over again, return the ignition switch to the "ACC" or "LOCK" position, restart the engine and press the "ASC OFF" switch.

ASC display, ASC OFF display

- ASC display When the ASC is operating, the information screen in the multi-information display will change and the ASC display will blink.

- ASC OFF brandish This is displayed when the ASC has been deactivated with the "ASC OFF" switch.

CAUTION:

CAUTION:

● Whenbrandish blinks, ASC is operating, which means that the route is slippery or that your vehicle'south wheels are beginning to slip. If this happens, drive slower with less accelerator input.

Annotation:

● The display when you start the engine. This means that the battery voltage momentarily display may come on in the multi-information brandish when you start the engine. This means that the battery voltage momentarily dropped when the engine was started. It does not indicate a malfunction, provided that the display goes out immediately.

● When a spare tyre has been put on your vehicle, the gripping ability of the tyre will be lower, making it more likely that the brandish will blink.

ASC alert display

If an abnormal condition occurs in the system while driving, thedisplay

If an abnormal condition occurs in the system while driving, thebrandish will blink or thewarning display, "SERVICE REQUIRED" and thebrandish volition be displayed at the same time.

CAUTION:

● [If thewarning display, "SERVICE REQUIRED" and thebrandish are shown at the same fourth dimension] The system may exist malfunctioning.

Park your vehicle in a safety identify and stop the engine.

Restart the engine and check whether thewarning brandish, "SERVICE REQUIRED" and the display become out. If the warning brandish goes out, in that location is no aberrant condition. If the warning display does not go out or appears oft, it is not necessary to terminate the vehicle immediately, but we recommend you to take your vehicle inspected.

● [If thedisplay blinks] If the temperature in the braking system continues to increment due to continuous brake control on a slippery road surface, thebrandish will blink and operation of the traction command function volition exist suspended to protect the brake system (normal functioning of the vehicle will not be affected). Park your vehicle in a safe place. When the temperature in the braking system has come downwards, thedisplay will be turned off and the traction control function will start operating over again.

READ Adjacent:

Cruise control

Prowl command is an automatic speed control system that lets y'all proceed the same driving speed. It can exist activated at 40 km/h (25 mph) or more. Circumspection: ● When you do not wish to drive at a

Reversing sensor arrangement

This system operates when y'all are bankroll the vehicle. It uses corner and dorsum sensors to detect an obstacle and sounds a buzzer to inform you of the estimate distance to the obstacle. CAUTION

Cargo loads

Cargo loads precautions CAUTION: ● Practice not load cargo or luggage higher than the meridian of the seatback. Exist sure that your cargo or luggage cannot move in one case your vehicle is moving. Having the re

Come across MORE:

Outside Mirror

GENERAL Data DOOR MIRROR OPERATION Remote Controlled Mirror Operation The mirror on the door mirror moves up/downwards and left/right past operating the remote controlled door mirror switch when the ignition switch is at the "ON" or "ACC" position. Heated Door Mirror Operation The rear wind

Diagnosis

CAN BUS DIAGNOSTICS Table CAUTION A diagnostic trouble code may not also be prepare in the Tin-B lines nether the conditions below. If no diagnostic trouble code has been fix due to electrical noise, confirm diagnostic item 26. Open up excursion at the CAN_H side of the Can-B bus lines Open circuit at the